The BatLure is a digital acoustic lure, built to playback sounds of up to 100 KHz. Both time expansion and real time sound recordings can be used. Time expansion recordings are automatically recognized and played back in real time. The robustly constructed device runs using an SD-card and 8 AA batteries. The BatLure is suited for: The luring of bats using recordings of social- and echolocation bat calls in order to catch them for research purposes To draw the attention of bats to a new potential roost to hasten its colonization. For example: bat boxes, newly constructed hibernacula as well as new summer- and maternity-roosts The playback of bat calls during training and bat-detector courses The testing of bat detectors and sound recording devices The localization of mating roosts through playback of male song/vocalizations and observation of responding territorial males What’s in the box 1 Apodemus BatLure 1 Carrying case with sufficient room for accessories 1 External power cable for a 12V power input 8 Rechargeable AA Batteries 1 SD-card with several pre-recorded sounds* 1 Manual *Recordings have been provided by Michel Barataud [http://ecologieacoustique.fr/] and Guido Pfalzer. Prefer to rent a BatLure? Need a BatLure for a limited period of time, or are you interested in giving the BatLure a try? No problem! Apodemus offers you the option to rent a BatLure by the week or by the month. The rental fees for the BatLure are: Per week: €211,75 (Including VAT, does not include shipping) Per month: €750,20 (Including VAT, does not include shipping) Would you like to rent a BatLure or would you like to know more about renting a BatLure? Feel free to contact us via rent.equipment@apodemus.eu Technical specifications Memory card: SD Card, formatted either in FAT16 or FAT32, up to 32GB supported Supported files: Wave files (.wav), Mono/ Stereo, 8/16 bit Output frequency: 5 kHz…100 kHz DAC Sampling frequency: up to 500 kHz Time expansion to real-time: Standard supported (switchable) Output power: ~6 W DAC resolution: 12 bit Battery operating time: > 10hours (30% output power) Batteries: 8x AA Battery External DC power: 6…16V, <3A peak, low impedance Speaker: Vifa XT25SC90-04 User controls: On/off, Volume up, Volume down User feedback: Power led, clip indicator, volume leds (5x) Size: ~ 170 x 120 x 65 mm including battery and speaker Housing: Black anodized aluminum Weight: 1000 g including batteries Tripod mount: Female thread for mounting on a standard photographing tripod (1/4UNC, 20tpi) External power connector: Standard Suspending eye: M6 eye bolt You can also take a look at our rentalpage for some more of our other rental products.

The BatCounter is an electronic device developed to use in field applications for counting bats, birds or other small animals passing through its rectangular or square shaped aluminium frame. The aluminium frame of the BatCounter has had a black anodized surface treatment that protects the BatCounter in the outdoor making it a rugged and reliable partner. When using the BatCounter for less than two days, you can rely on electrical power via the 8 AA batteries that are in the box. To enable longer runs, hook the BatCounter up to an external battery of 12V using the external power cable that is included. The BatCounter detects and counts the different passings of bats and stores all the information on the SD Card. Not only will the collected data be available on the SD Card, external communication of this data is possible. Reports stating results and default information can be send by email and or SMS text messages at set intervals. This additional feature will provide you with results without the need to be physically present at the site and it will give the reassurance that the system is operating smoothly on a constant basis. Simultaneously with detecting bats passing through its frame, the BatCounter is able to trigger your DSLR camera (Nikon or Canon) using an external cable or through infrared signal. The camera cable is not included but can be ordered separately. Mail us for the possibilities. What’s in the box 1 Apodemus BatCounter 1 Carrying strap 1 12V power cable 1 Antenna 8 AA batteries 1 SD Card 4 M6 eye bolts 1 Manual Prefer to rent a BatCounter? Need a BatCounter for a limited period of time, or are you interested in giving one of our BatCounters a try? No problem! Apodemus offers you the option to rent a BatCounter by the week or by the month. The rental fees for either the Large BatCounter or the Small BatCounter are: Per week: €305 (Including VAT, does not include shipping) Per month: €1085 (Including VAT, does not include shipping) Interested in renting a Small BatCounter or Large BatCounter or would you like to know more about renting a BatCounter? Feel free to contact us via rent.equipment@apodemus.eu. Technical specifications Detection Technique: 32 modulated infrared barrier beams detecting direction Minimum detection size: ≥ 25 mm Frame Size/Weight: 80x39x7 cm, 2800 g Active detection area: 76x35 cm Mounting: 4x M6 eye bolts are supplied to suspend the BatCounter 8x M6 female threads are foreseen for custom mounting Power supply: 8x AA batteries or external 12V (10..16V) Power Consumption: ≤ 40 mA under normal use. (Approx. 3 days on fresh .Varta “High Energy” AA batteries) Memory: SD Card, FAT16 or FAT32, up to 32 GB Configuration: Configuration via file on SD card Field software updates: Via SD Card update files File formats: CSV or TXT User interface: User interface shows system status. The user interface is protected by a removable aluminium cover Mobile phone functionalities: Warnings: SMS / email Daily totals: SMS/Email Daily reports: Email. An IP67 mobile phone antenna with SMA connector, SIM card and network coverage are required to use this feature Clock: Internal real-time clock Clock Accuracy: ±3 min/year (0°C .. +50°C)}6 min/year (-10°C .. +60°C) Clock backup time: More than one year after a full operational period of 24 hours or more (internal clock battery recharge time) Camera trigger: For Nikon and Canon wired with 2.5mm jack and infrared is advised for reliability and speed. However, the camera cable is not included as standard.Other brands on request. You can also take a look at our rentalpage for some more of our other rental products.

The BatCounter is an electronic device developed to use in field applications for counting bats, birds or other small animals passing through its rectangular or square shaped aluminium frame. The aluminium frame of the BatCounter has had a black anodized surface treatment that protects the BatCounter in the outdoor making it a rugged and reliable partner. When using the BatCounter for less than two days, you can rely on electrical power via the 8 AA batteries that are in the box. To enable longer runs, hook the BatCounter up to an external battery of 12V using the external power cable that is included. The BatCounter detects and counts the different passings of bats and stores all the information on the SD Card. Not only will the collected data be available on the SD Card, external communication of this data is possible. Reports stating results and default information can be send by email and or SMS text messages at set intervals. This additional feature will provide you with results without the need to be physically present at the site and it will give the reassurance that the system is operating smoothly on a constant basis. Simultaneously with detecting bats passing through its frame, the BatCounter is able to trigger your DSLR camera (Nikon or Canon) using an external cable or through infrared signal. The camera cable is not included but can be ordered separately. Mail us for the possibilities. What’s in the box 1 Apodemus BatCounter 1 Carrying strap 1 12V power cable 1 Antenna 8 AA batteries 1 SD Card 4 M6 eye bolts 2 Tree mount plates Prefer to rent a BatCounter? Need a BatCounter for a limited period of time, or are you interested in giving one of our BatCounters a try? No problem! Apodemus offers you the option to rent a BatCounter by the week or by the month. The rental fees for either the Large BatCounter or the Small BatCounter are: Per week: €305 (Including VAT, does not include shipping) Per month: €1085 (Including VAT, does not include shipping) Interested in renting a Small BatCounter or Large BatCounter or would you like to know more about renting a BatCounter? Feel free to contact us via rent.equipment@apodemus.eu. Technical specifications Detection Technique: 32 modulated infrared barrier beams detecting direction Minimum detection size: ≥ 25 mm Frame Size/Weight: 40x39x7 cm, 2200 g Active detection area: 36x35 cm Mounting: 4x M6 eye bolts are supplied to suspend the BatCounter 8x M6 female threads are foreseen for custom mounting Power supply: 8x AA batteries or external 12V (10..16V) Power Consumption: ≤ 40 mA under normal use. (Approx. 3 days on fresh .Varta “High Energy” AA batteries) Memory: SD Card, FAT16 or FAT32, up to 32 GB Configuration: Configuration via file on SD card Field software updates: Via SD Card update files File formats: CSV or TXT User interface: User interface shows system status. The user interface is protected by a removable aluminium cover Mobile phone functionalities: Warnings: SMS / email Daily totals: SMS/Email Daily reports: Email. An IP67 mobile phone antenna with SMA connector, SIM card and network coverage are required to use this feature Clock: Internal real-time clock Clock Accuracy: ±3 min/year (0°C .. +50°C)}6 min/year (-10°C .. +60°C) Clock backup time: More than one year after a full operational period of 24 hours or more (internal clock battery recharge time) Camera trigger: For Nikon and Canon wired with 2.5mm jack and infrared is advised for reliability and speed. However, the camera cable is not included as standard.Other brands on request. You can also take a look at our rentalpage for some more of our other rental products.

As an accessory for the BatLure we have developed the BatLure Spinner. Using the BatLure Spinner in combination with the BatLure increases your chances of successfully capturing bats as they move about their habitat. The BatLure Spinner consists of two ultrasonic loudspeakers with a mirror mounted between them. This mirror turns – spins – on an axis. Sound emanating from the speakers is reflected off the rotating mirror, causing it to scatter. Scattering the sound results in greater variation in the signal. This creates the illusion that the source of the sound is moving, which has been shown by empirical research to result in a higher rate of capture. The BatLure Spinner is an accessory intended for use with the BatLure, available from Apodemus. Please note that you must be in possession of a BatLure in order to use the BatLure Spinner. Please note: In order to use the BatLure Spinner, you must have a BatLure from the series "BL1715001" or later, which runs on firmware “TAG 20190227" or a more recent version. What’s in the box 1 BatLure Spinner 1 Manual Prefer to rent a BatLure Spinner? Need a BatLure Spinner for a limited period of time, or are you interested in giving the BatLure Spinner a try? No problem! Apodemus offers you the option to rent a BatLure Spinner by the week or by the month. The rental fees for the BatLure Spinner are: Per week:    €90,75 (Including VAT, does not include shipping) Per month: €321,50 (Including VAT, does not include shipping) Would you like to rent a BatLure Spinner or would you like to know more about renting a BatLure Spinner? Feel free to contact us via rent.equipment@apodemus.eu. Technical specifications Size: 160 x 140 x 60 mm Weight: 580 g Cable length: 2 m You can also take a look at our rental page for some more of our other rental products.

The Pettersson D240x is a heterodyne detector and has the following options: Sound recording (max. 3,4 seconds) After the sound is recorded it is possible to play it in the heterodyne mode while simultaneously altering the frequency at which you are listening. A sound that cannot be directly identified can thereby be repeatedly replayed and assessed Delayed (time-expansion) playback of the recorded sound (the sound is slowed 10x, thereby also lowering the frequency 10x) A digital recorder, such as the Tascam DR-05X, can be connected to the D240x to record the time expanded calls for analysis on a PC This D240x bat detector is delivered together with a case to protect it and a FREE rechargeable 9V battery. The ideal bat detector for anyone who works with bat detectors professionally. What's in the box? 1 Pettersson D240x bat detector 1 Rechargeable 9V battery 1 Protective case 1 Carrying strap 1 Manual Technical specifications Type: Heterodyne and time expansion (x10 or x20) Microphone: Advanced electret Frequency range: 10 - 120 kHz (min.) Display accuracy: +/- 0.15 kHz Bandwidth: 8 kHz (+/- 4 kHz), -6 dB Sampling frequency: 307 kHz Memory size: 1M x 8 bits Resolution: 8 Bit Storage time: 3.4, 1.7 or 0.1 sec. (selectable via switch) Trigger modes: Manual, level - broadband, level - narrowband Pretrigger: 50% of the selected storage time Battery: 1 x 9V (included) Quiescent current: 30 mA typ. including LCD backlight Size: 119 x 60 x 25 mm Weight: 170 g. including battery Outputs: 2 x 3.5 mm jacks for headphones and recording device (appr 350 mVrms/3.3 kohm) Comment switch: Yes Miscellaneous: Overload indicator, adjustable input gain, replay of signal in memory through heterodyne system If you are also interested in an spare rechargeable 9V battery, please contact us at info@apodemus.eu.

Heterodyne detector with backlit, large digit, accurate digital display, showing the tuned frequency. The frequency and volume controls are on the side of the case, making it easy to adjust. This D200 bat detector is delivered together with a case to protect it and a FREE rechargeable 9V battery. What's in the box? 1 Pettersson D200 bat detector 1 Rechargeable 9V battery 1 Protective case 1 Carrying strap 1 Manual Technical specifications Type: Heterodyne Microphone: Electret Frequency range: 10 kHz – 120 kHz Weight: 150 g Size: 119 × 60 × 25 mm Battery: 9V battery (included) If you are also interested in an spare rechargeable 9V battery, please contact us at info@apodemus.eu.

The u256 sets a new standard for USB microphones offering excellent sensitivity, low noise, small size and ultra-low power consumption – all for a modest price. The components are housed in a slim and durable aluminium enclosure. Like the well-known Pettersson M500-384 microphone, the u-series microphones identify as standard audio recording devices on Windows, OS X, Android, iOS and Linux. Likewise, they are compatible with most common sound recording apps and programs. The microphones are naturally compatible with the BatSound and BatSound Touch software. Please verify the hardware/software compatibility and that 256 kHz recording is supported. Certain smartphones/tablets – particularly low-end devices – have been found not to support USB audio at 256 kHz. The USB connector on the u256 plugs directly into a USB Micro B jack, becoming a small and portable recording unit. In order to connect the u256 to devices with other types of USB jacks or when space constraints make it difficult to plug the u256 directly into the USB jack, an extension cable and/or an adapter can be used. Such cables and adapters must be OTG enabled. For Apple devices, we recommend using the official Apple adapter (art. code MD821ZM/A). Recommended software Windows: BatSound, BatSound Touch, Audacity Mac OS: Audacity Linux: Audacity Android: Bat Recorder iOS: Ultrasonic Analyzer Specifications Weight: 25 g Dimensions: 43 x35 x13 mm Current consumption: 26 mA Frequency range: 1 kHz - 128 kHz Recording format: 256 kHz/16 bits Anti-aliasing filter: Yes

The u384 sets a new standard for USB microphones offering excellent sensitivity, low noise, small size and ultra-low power consumption – all for a modest price. The components are housed in a slim and durable aluminium enclosure. Like the well-known Pettersson M500-384 microphone, the u-series microphones identify as standard audio recording devices on Windows, macOS, Android, iOS and Linux. Likewise, they are compatible with most common sound recording apps and programs. The microphones are naturally compatible with the BatSound and BatSound Touch software. Please verify the hardware/software compatibility and that 384 kHz recording is supported. Certain smartphones/tablets – particularly low-end devices – have been found not to support USB audio at 384 kHz. The USB connector plugs directly into a USB C connection, making it a small and portable recording device for Android smartphones. To connect the u384 to your iOS device, you need a lightning (male)-USB C (female) connection that you can connect to the USB C connection of the u384. Recommended software Windows: BatSound, BatSound Touch, Audacity Mac OS: Audacity Linux: Audacity Android: Bat Recorder iOS: Ultrasonic Analyzer Specifications Weight: 25 g Dimensions: 43 x35 x13 mm Current consumption: 28 mA Frequency range: 1 kHz - 192 kHz Recording format: 384 kHz/16 bits Anti-aliasing filter: Yes

Next generation mobile bat detector. The Elekon BATLOGGER M2 is a bat call recorder that records ultrasonic calls from bats in real time and saves those files onto a micro SD card. The BATLOGGER M2 is easy to use and provides all the features you need in a bat detector. You can tag recordings during your survey and make voice recordings with additional information, so that it’s the only tool that you need to have with you. What’s in the box? 1 Batlogger M2 1 Microphone M2 SiSonic 1 MicroSD card 16GB 1 USB-C to USB-C cable 1 Quick-Start-Guide Technical Specifications Size: 220 x 70 x 46 mm Weight: 222g Acoustic signal processing: Real time 16bit-full spectrum Sampling rates: 312.5, 384, 500 kHz Type of microphone: SiSonic Sensitivity range: 10-192 kHz Operating time: up to 15h per battery charge Audio out: 3,5mm plug Live monitoring: Heterodyne, Divider Display: LCD 240 x 320 Storage: microSD, 16GB (included) Protection class: IP40 (except microphone) Battery: 3,6V, 2500mAh (internal) Charging: USB-C (fast charging) Sensors: Temperature, humidity, brightness GPS: Yes

The Batlogger M is a further developed version of the first Elekon Batlogger. Next to the recording of bat calls themselves and the time and date of the recording, the Batlogger M also registers the GPS coordinates of the sighting through the built in GPS receiver, as well as the ambient temperature. The Batlogger M is equipped with an internal battery that can make recordings during several sequential nights without recharging it. Data is stored on an SD card. The free ‘BatExplorer software’ makes it easy for you to manage and further analyze the collected data. The software is available for Windows as well as Mac-OS users and contains basic identification software that makes suggestions that have to be validated by the user. One of the applications that the Elekon Batlogger M is used for is the research through a car transect. (Inventories performed from a car, using transects). What’s in the box 1 Batlogger M 1 Microphone FG black 1 SD-Card 16GB 1 Power supply 100-240V 1 Case 1 Instruction manual 1 BATPARS Editor Software (Windows/Mac) 1 BatExplorer Software (Windows) Technical specifications Size: 80 x 155 x 38 mm Weight: 370g Size of case: 330 x 280 x 75 mm Power supply: 3.7V 4600 mAh Li-Ion battery (internal) Power consumption when recording: ~ 230 mA Power consumption in sleep mode: ~ 10 mA Operating time (recording): approx. 18 h per battery charge Operating time (sleep mode): approx. 400 h per battery charge Charger (included): Wall power supply 12 VDC (100-240 VAC) Charging socket (voltage, capacity): 9 V DC to 15 V DC, min. 5 W Sampling rate: 312.5 kHz Amplitude resolution: 16 bits (ADC) Sensitivity range: 10 – 150 kHz Trigger modes: Manual, Continuous Crest Adv, Crest, Period, SD Rec. duration after trigger (post-trigger): 0 – 10 sec @ 312.5 kHz SR Rec. duration before trigger (pre-trigger): 0 – 5 sec @ 312.5 kHz SR Rec. duration with manual trigger: 0 – 53.5 sec @ 312.5 kHz SR Rec. duration with continuous trigger: 0 – 53.5 sec @ 312.5 kHz SR Microphone: Electret microphone Speaker: Piezo, 90dB Audio output: Headphone (3.5 mm mini jack/ 2 ch. mono) Storage media: SD/SDHC/SDXC card (SD 2.0) max. 128 GB FAT32 formatted Length of single “calls” sequences: 0 – 53.5 sec per file @ 312.5 kHz SR File formats: *.wav, *.xml, *.gpx,, *.kml, *.log, *.csv Time expansion: Factor 1 – 20 (pitch)

The Elekon BATLOGGER S2 is a small all-in-one static bat detector and ultrasonic recorder that is easily controlled via the BatLogger Control App. You no longer have to navigate through confusing menus to find the setting you want. Simply connect the BATLOGGER S2 to the BATLOGGER control app and set it up in seconds. Setting up one or more devices has never been easier. It is a full spectrum bat detector with a recording time of up to 100 hours. And you don't have to replace the internal battery, but it is easy to charge using a USB-C cable. What’s in the box 1 Batlogger S2 1 USB-C to USB-C cable 1 Quick-Start-Guide Technical Specifications Acoustic signal processing: Real time 16bit-full spectrum Sampling rates: 312,5 kHz Type of microphone: SiSonic Number of microphones: 1 Sensitivity range: 10-150 kHz Trigger function: Yes, adjustable Schedular: Yes, adjustable with sunset/sunrise times Storage: Internal microSD, 32GB (included) Display: No Interface: BATLOGGER Control App GPS: No, location set from App Sensors: Temperature Dimensions: 132 mm x 72 mm x 35 mm Weight: 138 gr Protection: Weatherproof Battery: 3.6V, 3400mAh battery (internal) Charging: USB-C Operating time: up to 100h

The M500 USB microphone is the ultrasonic microphone of the D500x in a more compact aluminum housing and equipped with a USB 2.0 connector for connectimg to laptops and tablets. The microphone comes with a free ‘Lite’ version of the user-friendly BatSound Touch recording programme and allows for real-time tracking of spectrograms and wave forms. The recordings can be saved as 16-bit wave files. Sounds between 15 and 190kHz are monitored at a frequency of 500kHz with the M500 microphone, which can operate in both directional and omnidirectional modes. The well-known noise reduction algorithm, high sampling rate and anti-aliasing filter ensure high-quality sound. Manual, pre and post triggers are configurable. The software is available for Windows and Android systems. And the M500 comes with a 50cm cable fitted with a mini USB connector at one end (for the M500) and a standard USB A connector at the other. In addition, the M500 can also be connected to a tablet by using a USB A to USB micro extender with "OTG" label (for fast data exchange). What's in the box? 1 Pettersson M500 1 USB A - mini B cable, 0.5 m 1 Manual Technical specifications Dimensions and weight: 43x114x13 mm, 60 g Microphone: Advanced electret Sampling frequency: 500 kHz ADC resolution: 16 bits Frequency range: 10 kHz – 210 kHz Interface: USB 2.0, high speed, OTG/host Anti-aliasing filter: 8th order, 210 kHz Real-time monitoring: Via the PC sound card (down-sampling) Power supply: USB Operating system: Windows 7, 8, 8.1, 10, 11

The M500-384 is another addition to the series of Pettersson ultrasonic microphones. It offers great ease of use and is priced at roughly the same point as the M500. The M500-384 can be connected to a device running Android, Linux (Ubuntu), OS X, iOS or Windows and will work as a standard audio recording device. You don’t need to install any special drivers. Like the M500, the M500-384 comes in a slim and durable aluminium housing and uses the same advanced electret microphone technology as the well-known D500X detector. The M500-384 can be used in both directional and omni-directional mode. The M500-384 is the ideal choice if you plan to use your smartphone to record ultrasonic sounds. Also consider this model if you wish to be independent in terms of operating system or software. Check the hardware compatibility of the software you choose and whether it supports recording at 384 kHz. A 0.5 m USB cable is included (USB Mini- to USB-A). The image shows the M500-384 with an Android smartphone (not included) running the Bat Recorder app, available in the Google Playstore. What's in the box? 1 Pettersson M500-384 1 USB A - mini B cable, 0.5 m 1 Manual Technical specifications Size and weight: 43 × 114 × 13 mm, 60 g Microphone: Advanced electret Sampling frequency: 384 kHz ADC resolution: 16 bits Frequency range: 10 kHz – 160 kHz Interface: USB 2.0, full speed, OTG/host Anti-aliasing filter: 8th order, 160 kHz Power: USB bus powered

The Batscanner Stereo by Elekon makes it possible to accurately follow the flight routes of bats. The scanner modifies ultrasound into audible sound through the ‘mixer principle’ (heterodyne). The special feature of the Elekon Batscanner Stereo is that it can automatically reset the frequency to the best listening or peak frequency of the signal. Making it easier for the user to focus on the observation of behavior and leave the frequency adjustments to the scanner. The peak frequency will be indicated on the display, even when it concerns a short passage. The scanner translates the ultrasound to a stereo sound track so that the flight movement can be heard through the head phones. A real benefit to the research of flight routes. This Batscanner is also often used as a second detector: A scanner used to be sure that no bat is missed on alternative frequencies than the frequency used on the main detector. Its small size and pleasant shape that fits exactly in your hand makes the Elekon Batscanner Stereo an essential companion. What’s in the box? 1 Elekon Batscanner Stereo 3 AAA Batteries 1 Manual Technical specifications Type: Stereo heterodyne conversion Microphone: Electret-condenser Sensitivity range: 15-120 kHz Trigger function: Yes Battery: 3 x 1,5 V batteries type AAA (included) Operating time: 20 .. 25 h Size: 62 x 120 x 27 mm Weight: 145 g Audio output: 3.5mm plug / speaker

Detecting bat sounds is easier than ever. All you have to do is turn on the Elekon Batscanner and listen. That's it. The ultrasonic sounds are automatically converted into the audible range. No adjustments are needed. The Batscanner recognizes the bats' calling frequency and automatically adjusts the mixing frequency. A smart system in the Batscanner automatically filters out the noise. But with the preservation of the low frequency call of the bat within this spectrum. What’s in the box? 1 Batscanner 3 AAA Batteries 1 Manual Technical specifications Type: Heterodyne conversion Microphone: Electret-condenser Sensitivity range: 15-120 kHz Trigger function: Yes Power supply: 3x 1,5 V batteries type AAA (included) Operating time: 20 .. 25 h Size: 62 x 120 x 27 mm Weight: 145 g Audio output: 3.5mm plug / speaker

Titley has developed a new fully customizable, durable nature recorder instead of the Anabat Swift. The Ranger has all the features you would expect from Titley Scientific recorders: durability in tough field conditions, user-friendly, compact, lightweight, and with built-in GPS. The Ranger can be expanded with various microphones, including discreet, side-mounted, or front-mounted acoustic microphones, and front-mounted omnidirectional or directional ultrasonic microphones - all of which are weather-resistant, highly sensitive, and easy for the user to replace in the field. The Ranger can record various sounds simultaneously. Setting it up is simple; use the pre-set recording modes, and the GPS determines your location, sunset, and sunrise to record precisely when needed. You don't need phones or external devices for installation; you can adjust the settings via the internal color touchscreen. Deploy for longer periods with a battery capacity of 8 AA batteries (100 nights ultrasonic or 700 hours acoustic*), or use external power with or without solar panels for long-term or permanent installation. The camouflaged, robust housing has multiple attachment points for everything from cable ties to camera tripod mounts and elastic bands. If you want additional security, you can purchase a security box and a python lock. In that case, please contact us at  info@apodemus.eu. What's in the box 1 Ranger recorder 1 Magnetic lanyard 3 Microphone socket caps 1 External power dust cap 1 Quick Start User Guide Technical specifications Dimensions: 194mm x 123mm x 50mm Weight: 478g (excluding batteries) Batteries: 4 or 8 AA batteries, external power, and solar power options Battery Life: 700 hours acoustic / 100 nights ultrasonic with 8 AA batteries Memory: 2 x SDHC/SDXC memory cards (up to 2 x 1TB) Audio Output: Headphone jack for frequency division output (ultrasonic) and stereo reproduction (acoustic) Frequency Range: 20Hz to 250kHz (depending on microphone) Housing: Camouflage print, weather and shock resistant (IP67), with tripod mount GPS: Built-in (daily GPS fixes, transect mode - GPS fix every second) File Output: Full spectrum (.wav), zero crossing (.zc), GPS track (.gpx), and temperature sensor log (.csv) Sample Rates: 500, 384, 320, 192, 96, 48, 44.1, 32, 24, 22.05 ksps Channels: 3 channels. 1 ultrasonic or acoustic (front), and 2 acoustic only (sides). Suitable for simultaneous recording (stereo-acoustic and ultrasonic) Display: 2.4” Color LCD touchscreen Factory warranty: Detector: 2 years Microphones: 1 year Optional Accessories: Low-profile acoustic microphones for side or front mounting Omnidirectional ultrasonic microphone for front mounting Directional ultrasonic microphone for front mounting Lockable security box If you would like other accessories, please contact info@apodemus.eu.

THIS PRODUCT IS NO LONGER AVAILABLE. We recommend the D200. A basic heterodyne bat detector, with a highly sensitive microphone an a backlit frequency dial for easy usage at night. Technical specifications Type: Heterodyne Microphone: Electret + ceramic Frequency range: 10 kHz – 120 kHz Weight: 220 g Size: 113 × 71 × 33 mm

The new, bigger brother of the BatLure External Speaker. The speaker connector fits BatLures with serial number BL1307001 and above and works through simple plug-and-play installation. The speaker is splash-proof and therefore suitable for outdoor use. Also, the speaker box is equipped with a tripod wire, allowing it to be placed on a tripod or hung from the supplied suspension eye. Specifications Weight: 1110 g Cable length: 3 meter Dimensions: 120 x 120 x 60 mm Also take a look at our rental page for the rental options!

This external speaker is an addition to the Batlure family. The speaker connector fits BatLures with serial number BL1307001 and higher and works through simple plug and play installation. The speaker is splash-proof and therefore suitable for outdoor use. The attached mounting plate can be dismantled and mounted in different positions. Specifications Weight: 300 g Cable length: 3 meter Dimensions: 65x65x53 mm Power: ~6W Also take a look at our rental page for the rental options!

When on field work we often have no access to power points. Still, in some cases you will need a reliable source of electricity for a long period of time, for example for playing recordings of bat calls in order to lure bats. That is why Apodemus has developed a Solar Powerkit especially for the BatLure. What’s in the box 1 Handy 20W solar panel 1 12V battery 1 Built-in timer The built-in timer allows you to play bat calls at exactly the right time. Cable lengths are custom made.The Solar Power Kit provides on average sufficient power to run the BatLure 4 hours a day. The actual duration depends on the season, sunlight and the type of sounds you play. Technical specifications Dimensions solar panel: 520x350x30 mm Maximum power supply: 20W Battery Box dimensions: 195x240x130 mm Battery: 12V / 8Ah Battery charging time: ~ 6 hours in full sun BatLure playing time: ~ 16 .. 32 hours on a full battery (with standard settings) Do you have any specific requirements for the Solar Powerkit? Feel free to contact us via info@apodemus.eu. We can adjust the device to all your circumstances. The BatLure Solar Powerkit can also be used in combination with the BatCounter. In that case, please contact us.

The adapter makes it possible to connect the BatLure to the electricity network (110/ 220 volts). The constant power supply enables the BatLure to transmit for extended periods. In situations in which the BatLure is used to support the mitigation to new accommodation, this is a valuable addition. Consider, for example, mitigating measures where bats need to migrate from a building that’s about to be demolished. Even when the BatLure is being used to give indoor bat detector training, it’s useful when it can be connected to the electricity network. What’s in the box 1 BatLure External Power adapter 110/ 220V 1 AC Plug mix (4 pieces) 1 BatLure External Power Cable

In principle, the eight AA batteries in de BatCounter are only used to test the device or to count over very short periods of time (e.g. a few nights). If you wish to use the BatCounter over longer periods, it is recommended that you connect to a 12-volt battery or the 110/ 220-volt electricity network. The BatCounter Powerkit comes with 1 BatCounter External Power adapter 110V/ 220V 1 AC Plug mix (4 pieces) 1 BatCounter External Power Cable

The BatLure Timerbox allows you to set specific working times for your BatLure. An ideal companion when luring bats to new roosts or when catching bats with nets within certain time frames. This way you don't always have to be physically present to switch your BatLure on and off. You also save energy from, for example, battery power or solar installations. The timer is programmable with multiple on and off times (per day or per week). There is a button to turn the timer on and off automatically or manually. The timer is housed in a waterproof housing that can be opened without tools. The timer box is fitted with a screw to secure the housing against unauthorized opening. To use the Timerbox, it is important that you remove the internal batteries from the BatLure and that an external power supply (battery or mains adapter) is available. Specifications Weight: 350 g Cable length: 1 meter to the power supply 1 meter to the BatLure Dimensions: 150x115x75 mm Water resistance: Approx IP-66 (dustproof and water resistant)

Camera cable to connect your BatCounter to your camera. This is a standard cable. If desired, you can choose the right adapter that will be suitable for your camera. The cable has a length of 5 meters. Look in the overview below which adapter is suitable for your camera. If your camera or adapter is not listed, please contact us at info@apodemus.eu. Adaptor Canon E3 Suitable for: CANON Digital Rebel X, XT, XTi, XSi, Xi, T1i, T2i, T3i CANON EOS 550D, EOS 300, EOS 300V, EOS 50E, EOS 50, EOS 33, 30 Pentax K110D, K100D, Gx-1L Pentax *ist D, DS, DS2, DL, DL2 Hasselblad H, H1, H2, H2D Contax 645, Nl, Nx, N, Digital Samsung GX-20 Adaptor Canon N3 Suitable for: CANON EOS D30, D60, 10D, 20D, 30D, 40D, 50D CANON EOS 5D, 7D, 5D mark II, 1D,EOS 1Ds, EOS 1D MarkII, EOS 1Ds MarkII, EOS 1D MarkIII, EOS 1Ds MarkIII Adaptor Nikon 10p Suitable for: Digital SLR Nikon D1, D1h, D1x, D2, D2H, D2Hs, D2X, D3, D3X, D100, D200, D300, D700 KODAK DCS Pro 14n DCS620 FUJI S3 Pro, S5 Pro Film SLR Nikon F6, F5, F100, F90, F90x, N90, N90x Adaptor Nikon DC2 Suitable for: Nikon D90, D600, D610, D750, D3100, D3200, D5000, D5100, D5200, D5500, D7000 Adaptor Sony S1 Suitable for: Sony Alpha DSLR-A100, A200, A300, A350, A450, A500, A550, A700, A850, A900, A580, A560, A55 Minolta Maxxum/Dynax/AF 7D, 5D Minolta Maxxum/Dynax/AF 9, 7, 5, 4, 3 Minolta Maxxum/Dynax/AF 807si, 800si, 700si, 600si, 505si, 500si, Sweet, Sweets Minolta Maxxum/Dynax/AF 9000, 7000, 5000 Minolta DiMAGE 7Hi, 7i, 7, 5, A1, A2, A200 Adaptor Sony S2 Suitable for: Sony A7, A7r, A7S, A7II, A7R II Sony NEX-3NL Sony A6300, A6000, A5100, A5000, A3000, A58 Sony RX100M2 (RX100II), RX100M3 (RX100III) Sony HX50, HX60, HX400, HX300 Adaptor Olympus CB1 Suitable for: Olympus E-5, E-3, E-30, E-20, E-10, E-1,E-20N,E300,E100RS Olympus C8080,C7070,C5060,C2500L Adaptor Olympus UC1 Suitable for: Olympus E-400, E-410, E-420, E-510, E-520, E-30, E-620, E-450, E-P1, E-4XX SERIES Olympus SP-510UZ, SP-550UZ, SP-560UZ, SP-565UZ, SP-570UZ(no bulb photography)