Apodemus Pipistrelle Mini - Advanced, Affordable Bat Detection The Apodemus Pipistrelle Mini is a compact, cost-effective handheld bat detector designed for enthusiasts and beginners alike. Equipped with automatic heterodyne tuning and real-time expansion, this device provides an accessible yet advanced introduction to bat detection. While its sensitivity and resolution are more modest than premium detectors, its time expansion mode enables you to analyze bat calls in a way previously only possible with expensive detectors, offering a new level of acoustic insight. To use the Pipistrelle Mini, you need headphones, which are not included. Key Features: Heterodyne Mode: Scanning and manual tuning Time Expansion: Time expansion at 10x, in Real Time Expansion mode Spectrum Display: Visual representation of detected frequencies Spoken Frequency settings: Audible frequency settings (English) Cost-Efficient Design: Open PCB design for affordability What's in the box? 1 Apodemus Pipistrelle Mini 1 Manual Technical specifications Type: Heterodyne and real-time expansion (x10) Microphone: MEMS Frequency range: 10 - 110 kHz Battery: 3x AAA batteries (not included) Power consumption: 40mA Size: 70 x 56 x 23 mm Weight: 30 g. (excluding batteries) Outputs: 1 x 3.5 mm headphone jack Packaging: 145 x 95 x 28 mm / 70 g By purchasing the Apodemus Pipistrelle Mini, you directly support the BTO Acoustic Pipeline and Friends of Friendless Churches,contributing to wildlife conservation research and heritage preservation. This device is a factory-assembled and tested model, based on the Pipistrelle Mini DIY project from www.pippyg.com. Apodemus holds the exclusive license for producing and further enhancing the Pipistrelle Family of bat acoustic device and their IP. Continuous improvements to its design ensure enhanced performance and user experience, making it a valuable tool for bat enthusiasts and researchers. This may mean that the device you receive looks different than depicted on the pictures. For more information, please visit our Pipistrelle page. Within the EU mainland, this product is sent by letter post. Shipping outside the EU mainland at our standard rates or check our reseller page.

Apodemus Pippyg2 - Advanced, Affordable Static Bat Detection in the Pipistrelle family. The Apodemus Pippyg2 is the further developed version of the Pippyg. At first glance, it may not appear to have changed much. However, it offers significantly improved audio quality, with a lower, constant noise floor and no more peaks. In addition, the Pippyg2 is fitted with a USB-C port for external power supply and firmware updates. It remains a compact, cost-effective static recorder for bats and birds, designed for seamless operation via a mobile app. With a 384 kHz sample rate, it is optimized for use with automated identification systems, such as the BTO Acoustic Pipeline. The Pippyg2, which is supplied fully assembled, programmed and tested, has a bare PCB design and requires a waterproof enclosure for use in damp or wet environments. The Pippyg Bat Bag is ideal for this. Key Features: Full-Spectrum Recording: Captures audio at 384 kHz sample rate Mobile App Deployment: Easy setup and operation Integrated Metadata: Stamps GPS coordinates, ID, and timestamps in recordings Extended Battery Life: Typical runtime of 4 to 7 days What's in the box? 1 Apodemus Pippyg2 1 Quickstart Guide Technical specifications Type: Full-spectrum static ultrasound recorder Microphone: MEMS Trigger: Bat mode: bat-trigger algorithm above 12 kHz Bird mode: sound level Frequency range: 600 Hz - 110 kHz Sample rate: 48 kHz (Bird mode) 384 kHz (Bat mode) Battery: 3x AA battery (not included) Power consumption: Off: 0 mW Sleeping: 45 mW Awake: 150 mW Recording: 225 mW * Consumption is dependent on SD card used and may significantly differ from this number in some cases. USB port: USB Type C (for updates and power) Storage: microSD (not included) Size: 60 x 50 x 22 mm Weight: 30 g. excluding batteries Packaging: 145 x 95 x 28 mm / 70 g By purchasing the Apodemus Pippyg, you directly support the BTO Acoustic Pipeline and Friends of Friendless Churches, contributing to wildlife conservation research and heritage preservation. This device is a factory-assembled and tested model, based on the Pippyg DIY project from www.pippyg.com. Apodemus holds the exclusive license for producing and further enhancing the Pipistrelle Family of bat acoustic device. As part of ongoing improvements, the design may be updated, meaning the device you receive could differ slightly from the images shown. For more information, please visit our Pipistrelle page. Within the EU mainland, this product is sent by letter post. Shipping outside the EU mainland at our standard rates or check our reseller page.

Apodemus Bat Bag: Sturdy, waterproof protection for your Pippyg bat detector. The Pippyg Bat Bag is the ideal protective cover for both the Apodemus Pippyg and the Pippyg2. It ensures the device is protected against water, dust and knocks. Thanks to its clever design, you can easily hang the detector from trees or posts using, for example, a lashing strap (not included). The case is made entirely in the Netherlands from strong, recycled TPU material. The included cone and membrane provide extra protection for the microphone against moisture and dirt. Key benefits: Complete protection against water, dust and impacts Easy to attach to trees, posts or other surfaces Durable and environmentally friendly: made from recycled materials There are two versions of the Bat Bag, depending on which Pippyg you have purchased. Pippyg Bat Bag for your Pippyg with a serial number up to PP2610250. Pippyg2 Bat Bag for your Pippyg2 with a serial number from PP2611001 onwards. What's in the box? 1 Bat Bag (colour: brown or anthracite; this may vary per set) 1 Cone 1 Water-repellent acoustic membrane 1 Acoustic membrane sticker Mounting screws Technical specifications Materials: Recycled TPU Protection: IP64 Membrane: Acoustic Size: 130 x 100 x 15 mm Weight: 50 g. (excluding Pippyg) Packaging: 145 x 95 x 28 mm / 80 g Why Apodemus? At Apodemus, we believe in the importance of a healthy natural environment. That’s why we’re committed to sustainable products that last a long time. The Bat Bag isn’t just functional, it’s also environmentally friendly: locally produced and made from recycled materials. This means you’re not only contributing to scientific research, but also to a better future for our natural environment. For the user guide, please visit our Pipistrelle page. Within the EU mainland, this product is sent by letter post. Shipping outside the EU mainland at our standard rates or check our reseller page.